| | Buildings : Components
Items 1 to 10 of 10 | |
The buildings are based on past or present railway prototypes. They are not meant to be 100% accurate copies of the original. They do, however, closely follow the prototype and are designed to reflect the character, look, style and size of the original. The kits are complete with glazing and accessories and require only adhesives and paint to complete.Most of our models are constructed from resin castings produced from hand-finished moulds. Windows, doors, etc. are mainly cast in resin but in certain cases will use stone cast plaster, etched brass or whitemetal castings. Further details regarding individual buildings are shown in the lists below. Highland Castings now manufacture the building kits under their own name. The kits will continue to be sold through Invertrain Model Railways. Please note that kit numbers have changed from lists prior to August 2001.
| HCBA041 Roof Truss and Rafters |
 As supplied in HCBK003 (Abbotsbury Goods Shed)
Made by Highland Castings |
| Cost: £11.50 |  |
| HCBA044 Roof Truss and Rafters |
As supplied in HCBK007 (Abbotsbury Engine Shed)
Made by Highland Castings |
| Cost: £12.50 | |
| HCBA054 Water Tank Panels |
Click to enlarge | Four single water tank panels in one piece.
Whitemetal
Dimensions: 103mm(l) x 37mm(h)
Made by Highland Castings |
| Cost: £3.75 | |
 | A single water tank panel
Whitemetal
Dimensions: 30mm(l) x 37mm(h)
Made by Highland Castings |
| Cost: £1.00 | |
| HCBA056 Garage Building Front Panel |
The wall panel only from kit HCBK034
Cast resin
Made by Highland Castings |
| Cost: £9.50 | |
| HCBA057 Warehouse Building Front Panel |
The building front from HCBK037A
Cast resin
Made by Highland Castings |
| Cost: £9.50 | |
| HCBA058 Narrow Gauge Engine Shed (wall panel only) |
The front wall of the Narrow Gauge Engine Shed (HCBK038)
Cast resin
Made by Highland Castings |
| Cost: £10.00 | |
Click to enlarge | One piece casting, as supplied with HCBK008 (Abbotsbury Water Tower)
Stonecast plaster
Made by Highland Castings |
| Cost: £16.00 | |
| HCBK022A Coal Pile and Walling |
Click to enlarge | The coal pile and walling from our Engine Coaling Stage kit (HCBK022).
Cast resin
Made by Highland Castings |
| Cost: £9.00 | |
| HCBK059 Low Relief Roof - Module G |
Click to enlarge | Complete roof module, consisting of front, rear and side brick panels, roof panel and coping strips.
Cast Resin
Made by Highland Castings |
| Cost: £11.50 | |
A small supply of kits are normally held in stock for immediate delivery. Any out of stock kit can usually be supplied within 14 to 28 days. Postage and Packing charges are 10% of order value (Min. 90p). A limited number of ready-built buildings may be available from time to time.